Customize Feature Installer Code

If you have NBTevo the operation will be done via TeamViewer or by USB Stick.

For firmware versions NBTevo_H, I, J, K, L, M, N and O you can activate CarPlay by USB

    Steps for applying the coding via USB:

1. Download the file that we send you and copy it on a USB Stick 4GB 8GB 16GB 32GB formatted FAT32.
2. Plug the USB in car.
3. Wait 30 seconds.
4. Remove the USB from the car.
5. Long press on volume button for 15-20 seconds. ( the unit will reboot)
6. Wait another 20 second.
7. Coding Started.
8. Feature activated!

For firmware versions NBTevo_P, Q, R, S, T, U, V, W, X and Y you can activate CarPlay via ENET cable and you will need:

Laptop – Windows 8 or 10 x64
Wi-Fi Antenna – Your Phone need to connect wirelessly without any cable to CarPlay. You need to buy it yourself
ENET cable 

1. Check your current Map and iDrive version

Go to Navigation -> Select Options -> Select Settings -> Select Position & Version History -> Select Check Version

2. Ensure that your unit has a Wi-Fi plug​

Unfortunately you need to remove the AC Control panel, pull out your unit and check if it has a Wi-Fi plug.

If your unit doesn’t have a Wi-Fi Plug, CarPlay is not possible​

3. Requirements:

Wi-Fi  Antenna  Your Phone need to connect wirelessly without any cable to CarPlay. You need to buy it yourself

Laptop – Windows 8 or 10 x64

ENET Cable 

Strong Wi-Fi/Internet Connection – This ensures that our connection to your laptop is stable