How to connect your iPhone to CarPlay
NBTevo and EntryNav2 units

1. You need to have the Wi-Fi antenna plugged in the back of your NBTevo

NBTevo iD4/iD5/iD6 back

Aftermarket Wi-Fi Antenna

OEM Wi-Fi Antenna
2. You need to have Siri enabled on your iPhone
If you don’t, please follow the following steps:
Go to Settings, Siri & Search

Check Press Side Button of Siri

Enable Siri

Check Listen for “Hey Siri”

Press Continue

Say “Hey Siri, send a message.”

Say “Hey Siri, set a timer for three minutes”

Say “Hey Siri, play some music”

3. Now, you can connect to CarPlay
1. Go to Communication, Manage Mobile Devices

2. Delete all the phones from Unit and from iPhone in Bluetooth connection , then select Connect new device

3. Select Apple CarPlay

4. Click Confirm

5. Click OK

6. Check the code on your iPhone, to be the same as on your Navi and select “Pair”

7. Click Allow

8. Connected to Bluetooth

9. Use CarPlay

Don’t worry about Bluetooth getting disconnected because now, WiFi should be connected.
Bluetooth is used in the beginning, to read the security WPA2 from HU.
In maximum 20 seconds Apple CarPlay Home Screen appears.


